Authorize

class lsst.ts.authorize.Authorize(config_dir: None | str = None, initial_state: State = State.STANDBY, override: str = '')

Bases: ConfigurableCsc

Manage authorization requests.

The CSC receives requests for authorization from users and sets the authList on the required CSCs.

A future update will allow the CSC to interact with LOVE to validate a user request before setting the authList. It will also receive requests from LOVE to set the authList.

Parameters

config_dirstr (optional)

Configuration directory.

initial_statesalobj.State (optional)

Initial state of the CSC.

simulation_modeint (optional)

Initial simulation mode.

components_to_handleset or str (optional)

Name of the components to handle authorization for. By default, handle all components with available IDL files.

Attributes Summary

config_dir	Get or set the configuration directory.
default_initial_state
disabled_or_enabled	Return True if the summary state is State.DISABLED or State.ENABLED.
domain
enable_cmdline_state
simulation_help
simulation_mode	Get the current simulation mode.
summary_state	Get the summary state as a State enum.
valid_simulation_modes
version

Methods Summary

add_arguments(parser)	Add arguments to the parser created by make_from_cmd_line.
add_kwargs_from_args(args, kwargs)	Add constructor keyword arguments based on parsed arguments.
amain(index, **kwargs)	Make a CSC from command-line arguments and run it.
assert_enabled([action])	Assert that an action that requires ENABLED state can be run.
begin_disable(data)	Begin do_disable; called before state changes.
begin_enable(data)	Begin do_enable; called before state changes.
begin_exitControl(data)	Begin do_exitControl; called before state changes.
begin_standby(data)	Begin do_standby; called before the state changes.
begin_start(data)	Begin do_start; configure the CSC before changing state.
check_for_duplicate_heartbeat([num_messages])	Monitor heartbeat events and return True if any have a different private_origin.
close([exception, cancel_start])	Shut down, clean up resources and set done_task done.
close_tasks()	Shut down pending tasks.
configure(config)	Configure CSC.
do_disable(data)	Transition from State.ENABLED to State.DISABLED.
do_enable(data)	Transition from State.DISABLED to State.ENABLED.
do_exitControl(data)	Transition from State.STANDBY to State.OFFLINE and quit.
do_requestAuthorization(data)	Implement the requestAuthorization command.
do_setAuthList(data)	Update the authorization list.
do_setLogLevel(data)	Set logging level.
do_standby(data)	Transition from State.DISABLED or State.FAULT to State.STANDBY.
do_start(data)	Transition from State.STANDBY to State.DISABLED.
end_disable(data)	End do_disable; called after state changes but before command acknowledged.
end_enable(data)	End do_enable; called after state changes but before command acknowledged.
end_exitControl(data)	End do_exitControl; called after state changes but before command acknowledged.
end_standby(data)	End do_standby; called after state changes but before command acknowledged.
end_start(data)	End do_start; called after state changes but before command acknowledged.
error_callback(code, report)	Callback coroutine for error handling of the authorize handler.
fault(code, report[, traceback])	Enter the fault state and output the errorCode event.
get_config_pkg()	Get the name of the configuration package, e.g.
handle_summary_state()	Called when the summary state has changed.
implement_simulation_mode(simulation_mode)	Implement going into or out of simulation mode.
make_from_cmd_line(index[, check_if_duplicate])	Construct a CSC from command line arguments.
put_log_level()	Output the logLevel event.
read_config_dir()	Read the config dir and put configurationsAvailable if changed.
read_config_dir_loop()
read_config_files(config_validator, ...[, ...])	Read a set of configuration files and return the validated config.
set_simulation_mode(simulation_mode)	Set the simulation mode.
start()	Finish constructing the CSC.
start_phase2()	Handle the initial state.

Attributes Documentation

config_dir

Get or set the configuration directory.

Parameters

config_dirstr, pathlib.Path

New configuration directory.

Returns

config_dirpathlib.Path

Absolute path to the configuration directory.

Raises

ValueError

If the new configuration dir is not a directory.

default_initial_state: State = 5

disabled_or_enabled

Return True if the summary state is State.DISABLED or State.ENABLED.

This is useful in handle_summary_state to determine if you should start or stop a telemetry loop, and connect to or disconnect from an external controller

domain

enable_cmdline_state = True

simulation_help: str | None = None

simulation_mode

Get the current simulation mode.

0 means normal operation (no simulation).

Raises

ExpectedError

If the new simulation mode is not a supported value.

summary_state

Get the summary state as a State enum.

valid_simulation_modes: Sequence[int] = (0,)

version = '?'

Methods Documentation

classmethod add_arguments(parser: ArgumentParser) → None

Add arguments to the parser created by make_from_cmd_line.

Parameters

parserargparse.ArgumentParser

The argument parser.

Notes

If you override this method then you should almost certainly override add_kwargs_from_args as well.

classmethod add_kwargs_from_args(args: Namespace, kwargs: dict[str, Any]) → None

Add constructor keyword arguments based on parsed arguments.

Parameters

argsargparse.Namespace

Parsed command.

kwargsdict

Keyword argument dict for the constructor. Update this based on args. The index argument will already be present if relevant.

Notes

If you override this method then you should almost certainly override add_arguments as well.

async classmethod amain(index: int | enum.IntEnum | bool | None, **kwargs: Any) → None

Make a CSC from command-line arguments and run it.

Parameters

indexint, enum.IntEnum, True, or None

If the CSC is indexed, do one of the following:

• Specify True to make index a required command-line argument that accepts any nonzero index.

• Specify an enum.IntEnum class to make index a required command-line argument that only accepts the enum values.

• Specify a non-zero integer to use that index. This is rare; if the CSC is indexed then the user should usually be allowed to specify the index.

If the CSC is not indexed, specify None or 0.

**kwargsdict, optional

Additional keyword arguments for your CSC’s constructor.

assert_enabled(action: str = '') → None

Assert that an action that requires ENABLED state can be run.

Parameters

actionstr, optional

Action attempted. Not needed if this is called at the beginning of a do_... method, since the user will know what command was called.

async begin_disable(data: BaseMsgType) → None

Begin do_disable; called before state changes.

Parameters

dataDataType

Command data

async begin_enable(data: BaseMsgType) → None

Begin do_enable; called before state changes.

Parameters

dataDataType

Command data

async begin_exitControl(data: BaseMsgType) → None

Begin do_exitControl; called before state changes.

Parameters

dataDataType

Command data

async begin_standby(data: BaseMsgType) → None

Begin do_standby; called before the state changes.

Parameters

dataDataType

Command data

async begin_start(data: BaseMsgType) → None

Begin do_start; configure the CSC before changing state.

Parameters

datacmd_start.DataType

Command data

Notes

The override field must be one of:

• The name of a config label or config file

• The name and version of a config file, formatted as <file_name>:<version>, where the version is a git reference, such as a git tag or commit hash. This form does not support labels.

async check_for_duplicate_heartbeat(num_messages: int = 5) → int

Monitor heartbeat events and return True if any have a different private_origin.

Intended for use by check_if_duplicate.

The heartbeat loop should be running before this is called. This avoids the issue that if 2 CSCs are started at the same time then neither will see the other one’s heartbeat. This code also assumes that will be true; it will likely raise asyncio.TimeoutError if not.

Parameters

num_messagesfloat

The number of heartbeat messages to read.

Returns

originint

private_origin field of duplicate heartbeat, or 0 if none detected.

Raises

asyncio.TimeoutError

If no heartbeat seen within the specified time.

async close(exception: Exception | None = None, cancel_start: bool = True) → None

Shut down, clean up resources and set done_task done.

May be called multiple times. The first call closes the Controller; subsequent calls wait until the Controller is closed.

Subclasses should override close_tasks instead of close, unless you have a good reason to do otherwise.

Parameters

exceptionException, optional

The exception that caused stopping, if any, in which case the self.done_task exception is set to this value. Specify None for a normal exit, in which case the self.done_task result is set to None.

cancel_startbool, optional

Cancel the start task? Leave this true unless calling this from the start task.

Notes

Removes the SAL log handler, calls close_tasks to stop all background tasks, pauses briefly to allow final SAL messages to be sent, then closes the dds domain.

async close_tasks() → None

Shut down pending tasks. Called by close.

async configure(config: SimpleNamespace) → None

Configure CSC.

Parameters

configtypes.SimpleNamespace

Raises

NotImplementedError

If config.auto_authorization == False.

async do_disable(data: BaseMsgType) → None

Transition from State.ENABLED to State.DISABLED.

Parameters

datacmd_disable.DataType

Command data

async do_enable(data: BaseMsgType) → None

Transition from State.DISABLED to State.ENABLED.

Parameters

datacmd_enable.DataType

Command data

async do_exitControl(data: BaseMsgType) → None

Transition from State.STANDBY to State.OFFLINE and quit.

Parameters

datacmd_exitControl.DataType

Command data

async do_requestAuthorization(data: BaseMsgType) → None

Implement the requestAuthorization command.

Parameters

datacmd_requestAuthorization.DataType

Command data.

async do_setAuthList(data: BaseMsgType) → None

Update the authorization list.

Parameters

datacmd_setAuthList.DataType

Authorization lists.

Notes

Add items if the data string starts with “+”, ignoring duplicates (both with respect to the existing items and within the data string). Remove items if the data string starts with “-”, ignoring missing items (items specified for removal that do not exist). Ignore whitespace after each comma and after the +/- prefix.

async do_setLogLevel(data: BaseMsgType) → None

Set logging level.

Parameters

datacmd_setLogLevel.DataType

Logging level.

async do_standby(data: BaseMsgType) → None

Transition from State.DISABLED or State.FAULT to State.STANDBY.

Parameters

datacmd_standby.DataType

Command data

async do_start(data: BaseMsgType) → None

Transition from State.STANDBY to State.DISABLED.

Parameters

datacmd_start.DataType

Command data

async end_disable(data: BaseMsgType) → None

End do_disable; called after state changes but before command acknowledged.

Parameters

dataDataType

Command data

async end_enable(data: BaseMsgType) → None

End do_enable; called after state changes but before command acknowledged.

Parameters

dataDataType

Command data

async end_exitControl(data: BaseMsgType) → None

End do_exitControl; called after state changes but before command acknowledged.

Parameters

dataDataType

Command data

async end_standby(data: BaseMsgType) → None

End do_standby; called after state changes but before command acknowledged.

Parameters

dataDataType

Command data

async end_start(data: BaseMsgType) → None

End do_start; called after state changes but before command acknowledged.

Parameters

dataDataType

Command data

async error_callback(code: int, report: str) → None

Callback coroutine for error handling of the authorize handler.

Parameters

codeint

The error code.

reportstr

The error report.

async fault(code: int | None, report: str, traceback: str = '') → None

Enter the fault state and output the errorCode event.

Parameters

codeint

Error code for the errorCode event. If None then errorCode is not output and you should output it yourself. Specifying None is deprecated; please always specify an integer error code.

reportstr

Description of the error.

tracebackstr, optional

Description of the traceback, if any.

static get_config_pkg() → str

Get the name of the configuration package, e.g. “ts_config_ocs”.

async handle_summary_state() → None

Called when the summary state has changed.

Override to perform tasks such as starting and stopping telemetry (example).

Notes

The versions in BaseCsc and ConfigurableCsc do nothing, so if you subclass one of those you do not need to call await super().handle_summary_state().

async implement_simulation_mode(simulation_mode: int) → None

Implement going into or out of simulation mode.

Deprecated. See simulation mode for details.

Parameters

simulation_modeint

Requested simulation mode; 0 for normal operation.

Raises

ExpectedError

If simulation_mode is not a supported value.

classmethod make_from_cmd_line(index: int | enum.IntEnum | bool | None, check_if_duplicate: bool = False, **kwargs: Any) → BaseCsc

Construct a CSC from command line arguments.

Parameters

indexint, enum.IntEnum, True, or None

If the CSC is indexed, do one of the following:

• Specify True to make index a required command-line argument that accepts any nonzero index.

• Specify an enum.IntEnum class to make index a required command-line argument that only accepts the enum values.

• Specify a non-zero integer to use that index. This is rare; if the CSC is indexed then the user should usually be allowed to specify the index.

If the CSC is not indexed, specify None or 0.

check_if_duplicatebool, optional

Check for heartbeat events from the same SAL name and index at startup (before starting the heartbeat loop)? The default is False, to match the BaseCsc default. Note: handled by setting the attribute directly instead of as a constructor argument, because CSCs may not all support the constructor argument.

**kwargsdict, optional

Additional keyword arguments for your CSC’s constructor.

Returns

csccls

The CSC.

Notes

To add additional command-line arguments, override add_arguments and add_kwargs_from_args.

async put_log_level() → None

Output the logLevel event.

async read_config_dir() → None

Read the config dir and put configurationsAvailable if changed.

Output the configurationsAvailable event (if changed), after updating the overrides and version fields. Also update the version field of evt_configurationApplied, in preparation for the next time the event is output.

async read_config_dir_loop() → None

classmethod read_config_files(config_validator: Draft7Validator, config_dir: Path, files_to_read: list[str], git_hash: str = '') → SimpleNamespace

Read a set of configuration files and return the validated config.

Parameters

config_validatorjsonschema validator

Schema validator for configuration.

config_dirpathlib.Path

Path to config files.

files_to_readList [str]

Names of files to read, with .yaml suffix. Empty names are ignored (a useful feature for BaseConfigTestCase). The files are read in order, with each later file overriding values that have been accumulated so far.

git_hashstr, optional

Git hash to use for the files. “” if current.

Returns

types.SimpleNamespace

The validated config as a simple namespace.

Raises

ExpectedError

If the specified configuration files cannot be found, cannot be parsed as yaml dicts, or produce an invalid configuration (one that does not match the schema).

async set_simulation_mode(simulation_mode: int) → None

Set the simulation mode.

Await implement_simulation_mode, update the simulation mode property and report the new value.

Parameters

simulation_modeint

Requested simulation mode; 0 for normal operation.

async start() → None

Finish constructing the CSC.

• Call set_simulation_mode. If this fails, set self.start_task to the exception, call stop, making the CSC unusable, and return.

• Call handle_summary_state

• Set self.start_task done.

async start_phase2() → None

Handle the initial state.

Called after start.